BACKUP GENERATOR INSTALLATION SERVICES

Generator installation is the process of sizing a backup generator, setting it on a pad, connecting it to your fuel supply and electrical panel through a transfer switch, and testing it under load before it is left in service. Gengatorz Power Systems handles the whole job, permits included.

Most of the work happens before the generator arrives. A load calculation decides the size. Too small and the unit drops out when a large motor starts. Too large and you paid for capacity that never runs. Placement matters as well, since the generator needs clearance from windows, doors, and vents, and a level base that stays above standing water. We are licensed electricians, license number 63937. We install standby and portable generator hookups for properties of every size

Large liquid-cooled standby generator installed on a pad in a residential yard

STANDBY GENERATOR INSTALLATION FROM SIZING TO STARTUP

Standby generator installation starts with a load calculation on the actual service, not a rule of thumb. Square footage does not size a generator. What matters is the starting load of the largest motor on the property and what else runs at the same time.

Fuel comes next. Natural gas runs off the utility line with no tank to refill. Propane needs a tank sized to the generator's burn rate and the runtime you want. Diesel is standard on larger units and needs a fuel polishing plan if the tank sits full for long stretches.

Then placement: setback from openings, clearance for service access, and elevation above the flood line.

RESIDENTIAL BACKUP GENERATOR INSTALLATION FOR WHOLE HOME

Residential generator installation comes down to one decision. Whole house means the generator carries the entire panel, air conditioning included. Essential circuits means a smaller unit feeds a subpanel wired for the loads you choose: refrigerator, well pump, furnace, a few lighting circuits, and outlets for medical equipment.

Essential circuits costs less up front and less to run. Whole house means nobody has to think about what is on and what is off during an outage. A home installation covers the pad, the generator, the transfer switch, and the fuel connection. Permits and inspection apply the same as any other panel work.

START YOUR GENERATOR INSTALLATION WITH A LOAD CALCULATION

Most quotes open with a size. Ours opens with your panel. Tell us what you want covered and we will run the numbers, walk the site, and price the pad, the transfer switch, the fuel connection, permits, and commissioning together.

No surprise costs after the fact. If your service needs work before a generator can go in, you hear it up front rather than after the deposit.

Call us or fill out the form on this page. We answer 24 hours a day.